155187-43 / Cw-Mf Pentek Whole House Filter Replacement Cartridge

- By Pentek
18.53 New Out of stock
Free Shipping

Taxes will be calculated at Checkout.
US Delivery Time: 3-5 Business Days.

Out of Stock

This Pentek CW-MF string-wound polypropylene filter cartridge reduces sand, silt, scale, and rust particles for municipal drinking water and industrial fluid applications. It has a nominal filtration rating of 30 microns at an efficiency of 85%. The filter is made of polypropylene fiber cord that is wound on a rigid polypropylene core for greater surface area for strength and high dirt-loading capacity. It has an initial pressure drop of less than 1 pound per square inch (psi) at a maximum flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C). This string-wound filter cartridge is for use in various applications, including drinking water purification, irrigation, and industrial processes, among others.
Specifications
Nominal filtration rating 30 microns
Initial pressure drop at 10 gpm 1 psi
Operating temperature range 40 to 145 degrees F (4.4 to 62.8 degrees C)
Maximum dimensions (H x W) 9-7/8 x 2-1/4 inches (251 x 60 mm)
The nominal filtration rating is for a particle removal efficiency of 85%.
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.


Features :
  • Reduces sand, silt, scale, and rust particles in residential and municipal drinking water and industrial fluid applications
  • Nominal filtration rating of 30 microns
  • Polypropylene cord wound on a polypropylene core for strength and high dirt-loading capacity
  • Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
  • Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).

  • Product weight : 0.35



    Warning Warning - California Proposition 65

    This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

    Product Code: PENTEK-CW-MF
    SKU: COWA-PENTEKCWMF

    Write a review

    Your Name:


    Your Email:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below:



    YOU MAY ALSO CONSIDER
    All Rights Reserved. Copyright @ 2024. virventures.com