155281-43 / Bbf1-20Mb Pentek Whole House Filter Replacement Cartridge

- By Pentek
191.90 New In stock
List Price: $191.90 Free Shipping

Taxes will be calculated at Checkout.
US Delivery Time: 3-5 Business Days.

Only 4 left in stock - Order Now.

This Pentek BBF1-20MB water deionization filter cartridge reduces hardness minerals in low flow rate medical, pharmaceutical, cosmetic, and circuit board manufacturing applications. The media is mixed bed (cation and anion) moist spherical bead deionization resin that meets Food and Drug Administration standards, and there are polypropylene pre- and post-filters to reduce the possibility of water bypassing the resin. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has a capacity of 1850 grains, an initial pressure drop of 1.10 pounds per square inch (psi) at a recommended flow rate of 1.25 gallons per minute (gpm), and a temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C). This water deionization filter cartridge is for the demineralization of water used in various industrial processes.
Specifications
Capacity 1850 grains
Initial pressure drop at 1.25 gpm 1.10 psi
Temperature range 40 to 100 degrees F (4.4 to 37.8 degrees C)
Maximum dimensions (H x W) 20 x 4-1/2 inches (508 x 114 mm)
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.


Features :
  • Demineralizes water for medical, pharmaceutical, cosmetic, and circuit board manufacturing applications
  • Mixed bed moist spherical bead deionization resin with polypropylene pre- and post-filters
  • Capacity of 1850 grains
  • Initial pressure drop of 1.10 psi at a recommended flow rate of 1.25 gpm
  • Temperature range of 40 to 100 degrees F (4.4 to 37.8 degrees C)

  • Product weight : 8.28



    Warning Warning - California Proposition 65

    This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

    Product Code: PENTEK-BBF1-20MB
    SKU: COWA-PENTEKBBF120MB

    Write a review

    Your Name:


    Your Email:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below:



    YOU MAY ALSO CONSIDER
    All Rights Reserved. Copyright @ 2024. virventures.com