14 Ft. Lighting Crank Truss Stand 220 Lbs. Capacity

- By ProX
339.99 New In stock
List Price: $339.99 Free Shipping

Taxes will be calculated at Checkout.
Estimated delivery time 5 to 10 days.

Only 10 left in stock - Order Now.

TheProX XT-CRANK14FT-220 Truss Heavy Duty Crank Stands are an integral part of the Truss SQ System for temporarily mounting lights for small to medium-sized DJ lighting at any event. It has Integrated casters,independentlyadjustable legbraces, and nylon guided leg sliders, which can all be used in conjunction with another same-rated stand, & trusses and T-Adapters (sold separately). Eachismade with Heavy Duty All-metal components;Sturdy, steel/aluminum construction. Eliminate direct lifting and lowering of heavy loads with the ProXTruss Heavy Duty Crank Stand.It folds easily to a portable size for transport. It's equipped with a smooth, heavy-duty cranking mechanism. Perfect for a live band and mobile DJ applications, eliminate direct lifting and lowering of heavy loads.This crank is perfect for ourXT-TADAPTER-U this adapter is NOT included with this crank stand!SAFETY INSTRUCTIONS To avoid problems a competent person should inspect all rigging hardware, stands and equipment before each use and periodically do a major inspection for signs of wear, abuse, and general adequacy, as well as perform any manufacturer recommended preventive maintenance on schedule. Observe all warnings and usage instructions in the full manual. Use at your own risk.


Features :
  • Brand:ProX
  • 14 Ft. Lighting Crank Truss Stand 220 Lbs. Capacity
  • ItemNumber#XT-CRANK14FT-220
  • Dimensions:
  • Max Vert Load: 220 lbs.
  • Base Diameter: 63" / 5.25FT
  • Weight:46 lbs.
  • Basic Usage:
    1. Ensure that the stand is positioned on hard stable surface, in suitable location, on firm ground and clear of overhead obstacles.
    2. Stabilize legs before lifting the tower or any load.
    3. When outdoors, secure the tower with braces or cables, in case of wind.
    4. Check the cable, it should not show damaged or flattened areas nor broken strands.
    5. Using the Winch:
      1. For Lifting the tower, turn the winch handle clockwise.
      2. For lowering the tower, turn the winch handle counter-clockwise.
      3. Safety Notes:
        1. Loading on truss and stands should comply with rated weights.
        2. Lock all the safety mechanisms (safety pins, knobs)
        3. Loads must be centered & balanced on each lifting unit.
        4. Safety chains must be installed on each item attached to unit.
        5. Leave a safety perimeter with a radius 5ft greater than the maximum height of the stands during lifting and lowering of loads.
        6. During transport, close all the sections and lock the lifting carriage.
        7. Do not attempt to move the stand when loaded or in extended position.
        8. Service Notes:
          1. Servicing and repairs must be made by qualified persons.
          2. Cable, pulleys and telescopic masts must be inspected before each use. Any damaged cable must be replaced immediately.
          3. Annual inspection by an authorized technician is suggested.
          4. Shipping Dimensions69.00"L x 11.00"D x 13.00"HShipping Weight: 62.00 lbsUPC741459147464




          5. Product Code: XT-CRANK14FT-220
            SKU: XSPO-XTCRANK14FT220
  • Write a review

    Your Name:


    Your Email:


    Your Review: Note: HTML is not translated!

    Rating: Bad           Good

    Enter the code in the box below:



    YOU MAY ALSO CONSIDER
    All Rights Reserved. Copyright @ 2022. virventures.com